8000 Series Gas Valves
Gas Shut Off Valves Hazardous Area
MAXON Series 8000 Air Actuated Shut Off Valves combine a unique space-saving design with a
maintenance-free bonnet seal and a replaceable actuator for easy installation and smooth,
trouble-free operation. This gas valve's quick exhaust and powerful closing spring provide
valve closure in less than one second and reliable, long-life operation. Valve seats are
micro-lapped metals. MAXON gas valves ensure positive sealing with our trademark durability.
Insist on MAXON shut off valves for your safety-critical combustion systems.
Unlike other pneumatic valves, MAXON valves require no maintenance. More importantly,
MAXON seats require no regular tightening of valve packings like ball valve designs The Series
8000 Valve has been FM, CSA and CE rated for hazardous locations.
Printable Literature
Product Overview
Specifications/Installation
Valve Maintenance
Leak Testing
Valve Sizing Charts
ACTIONAIR® Gas and Oil Valves
Electro-Mechanical Gas Shut OffValves
These air actuated valves shut off gas or oil lines in less than one second and the Series
1000 and Series 2000 are approved for General Purpose and Hazardous Duty locations by FM
(Factory Mutual) and CGA (Canadian Gas Association). Powerful spring-loaded air operators
permit much higher differential pressure ratings.
Printable Literature
Product Overview
Specifications
Installation
Valve Maintenance
Leak Testing
Valve Sizing Charts
Gas Electro-Mechanical Valves
Electro-Mechanical Gas Shut Off Valves
These electrically actuated valves shut off gas or oil lines in less than one second.
All shut off valves come equipped with MAXON's long-lasting metal-to-metal seating.
A variety of optional body materials and body connections provide reliable operation
even for highly corrosive fuels and for oxygen. Application flexibility is provided
with 3/4" through 6" diameter line sizes, Cv flow factors up to 1230, and line pressures
up to 125 PSIG (8.6 bar).
Printable Literature
Product Overview
Specifications/Installation
Valve Maintenance
Leak Testing
Valve Sizing Charts
Circular INCINO-PAK®
Natural Gas Low Temp Burners
Circular INCINO-PAK® Industrial Burners have been specifically designed for the
incineration of combustible gaseous effluents inside cylindrical combustion chambers.
With INCINO-PAK® direct combustion, higher efficiencies can be achieved than
with powered burner systems. The special cone-type COMBUSTIFUME® Natural Gas
Burners provide easy outside access to the raw gas pilot, ignitor, and flame monitoring
components.
Printable Literature
Product Overview
Specifications
Installation
CYCLOMAX® LOW NOX
Natural Gas Low Temp Burners
The CYCLOMAX® Low NOx Burner provides clean combustion with NOx emission levels
below 25 ppm and CO levels less than 75 ppm. Lower emissions may be possible based on
application. The integral fan version of this industrial burner is available in 5 sizes,
up to 3,700,000 Btu/hr (1080 kW), and the EBMRV version is available in 4 sizes, up to
7,400,000 Btu/hr (2165 kW).
Printable Literature
Service Manual
Dimensional Drawings
Catalog Pages
INDIPAK
Natural Gas Low Temp Burners
MAXON INDIPAK natural gas burners are value engineered, nozzle-mix burners suited for
indirect fired applications in heat exchangers and fire tubes. The small, compact design
of this industrial burner produces outstanding turndown ratios of up to 25:1. Low NOx and
low CO production makes Indipak suitable for installation in most every area of the world.
Easy installation is provided with a complete packaged design including pressure regulator,
control actuator, and integral fan.
Printable Literature
Product Overview
Specifications
INDITHERM®
Natural Gas Low Temp Burners
MAXON INDITHERM® industrial burners are nozzle-mix, natural gas burners suited for
indirect fired applications in heat exchangers and fire tubes. The rugged design with
integral air and gas valves produces outstanding turndown ratios of up to 25:1. Low NOx
and low CO production make INDITHERM® ideal for installation in most areas of the world.
INDITHERM® is available with an integral fan or with flanged inlet to be used with a
separate blower.
Printable Literature
Product Overview
Specifications/Installation
LINOFLAME® Industrial Burner
Natural Gas Low Temp Burners
MAXON's style A, B & C LINOFLAME® Industrial Burners produce short, ribbon-type
flames by modular-designed section with customized drillings. Our type "VF" LINOFLAME®
Gas Burners are cast iron, V-faced, modular sections incorporating standardized drillings
for interchangeability. Maxon LINOFLAME® Burners are useful for foam laminating,
dip tanks, hot oil cooking, glass surface treatments, and general air heating.
Printable Literature
Product Overview
Specifications
Installation
M-PAKT® Ultra
Low NOx Burners
Typical MAXON quality and reliability is found in the M-PAKT® Ultra Low NOx Burners,
which provide the world's lowest levels of NOx and CO. NOx is typically < 9 ppm while CO
is maintained < 20 ppm in most applications. The M-PAKT® low NOx burner is suitable
for industrial air heating for ovens and dryers for paint finishing, paper making, food
baking, textile production, grain drying, and make-up air heating. With optional sleeve
materials, M-PAKT® burners substantially reduce emissions in oxidizers, incinerators,
heat exchangers and process heaters.
Printable Literature
Product Overview
Specifications/Installation
MEGAFIRE® Industrial Burner
Natural Gas Low Temp Burners
The MEGAFIRE® Industrial burner cleanly burns #2 oil, propane, or natural gas with
quiet operation and exceedingly low horsepower requirements. Standard heat releases are
available to 45,000,000 BTU/hr (13,000 kW), providing excellent application flexibility.
Dual fuel capability of this low temp burner provides reliable heat to kilns, dryers,
process heaters as well as numerous other industrial applications.
Printable Literature
Product Overview
Specifications
Installation
OPTIMA™ SLS Burner
Natural Gas Burners
• Extremely Clean, reliable heat with ultra
Low NOx and CO production for ease of
air permitting and environmental
compliance
• Large capacity heat releases with a
compact, robust flame geometry
• Intelligent ratio control for reliable
operation and optimal fuel efficiency
• Direct factory operational support with
optional communication gateway
• All steel and high temperature alloy
construction for reduced weight and
increased durability
• Fuel flexible with natural gas, propane,
and butane capability. Contact MAXON for
other fuels
• Configurable for dryers, air heaters, ovens,
kilns, process heaters, paper machines,
and a variety of other industrial
heating equipment.
Printable Literature
Product Overview
Specifications/Installation
OVENPAK® 400 Series
Natural Gas Low Temp Burners
MAXON's OVENPAK® 400 Series is the world's most flexible and reliable industrial burner.
The OVENPAK® burns most any fuel gas and requires only low pressure fuel. This natural gas
burner provides clean combustion with low NOx levels while providing unmatched turndown.
OVENPAK® Gas Burners provide outstanding performance in ovens and dryers, paint
finishing lines, paper and textile machines, food baking ovens, coffee roasters, grain dryers,
and fume incinerators.
Printable Literature
Product Overview
Specifications
Installation
OVENPAK® 500 Series
Natural Gas Low Temp Burners
The OVENPAK® 500 natural gas burner burns clean fuel gases, light oils, or both at
the same time. This industrial burner provides clean combustion with low NOx levels while
maintaining exceptional turndown for precise temperature control in a wide variety of processes
which include ovens and dryers, paint finishing lines, grain dryers, paper and textile machines,
coffee roasters, food baking ovens, and fume incinerators.
Printable Literature
Product Overview
Specifications/Installation
OVENPAK II® 400 Series
Natural Gas Low Temp Burners
MAXON's OVENPAK II® 400 Series improves on the world's most flexible and
reliable industrial burner by providing easier installation and extended accessories.
The OVENPAK II® burns most any fuel gas and requires only low pressure fuel.
This natural gas burner provides clean combustion with low NOx levels while
providing unmatched turndown.
OVENPAK II® Industrial Burners provide outstanding performance
in ovens and dryers, paint finishing lines, paper and textile machines,
food baking ovens, coffee roasters, grain dryers, and fume incinerators.
Printable Literature
Product Overview
Specifications
Installation
OVENPAK® LE Burner
Natural Gas Burners Low Temperature
• Operates on low gas supply pressures
• Provides clean combustion with low NOx
and CO levels
• Compact burner design provides quick and
easy installation
• Balanced pressured design for easy
commissioning and adjustment
• Visible ignition action speeds
commissioning and maintenance
• High turndown for exceptional process
control
Printable Literature
Product Overview
Specifications/Installation
RADMAX® ULTRA Low NOx Radiant Line Burners
Natural Gas Line Burners
RADMAX® Radient Low NOx Burners are designed to deliver uniform, high
intensity radiant energy for moisture removal in textile and paper ovens, paint
drying, and powder coating, as well as many pre-heat, plastic forming, heat
treating and annealing operations. With innovative ceramic or metal foam tiles,
the RADMAX® natural gas burner produces low to Ultra-Low NOx and CO levels
for a wide variety of industrial gas burner applications.
Printable Literature
Product Overview
Specifications
Installation
TUBE-O-FLAME®
Natural Gas Low Temp Burners
MAXON's TUBE-O-FLAME® industrial burners provide clean, low NOx heating
for tube firing. The TUBE-O-FLAME® burns most fuel gases inside an array of
tubes to provide reduced fuel TUBE-O-FLAME®consumption and better process
response. The low horsepower requirements reduce operating costs, and produce
clean combustion with outstanding reliability.
TUBE-O-FLAME® natural gas burners ensure improved performance for
industrial washers, dip tanks, water-bath heaters, solution tanks, and asphalt tanks.
Printable Literature
Product Overview
Specifications
Installation
TUBE-O-THERM®
Natural Gas Low Temp Burners
The MAXON TUBE-O THERM® burner-to-tube direct firing system provides uniform
heat transfer, eliminates "hot spots", and produces faster bring-up times than all
other tube burners. This industrial burner fires directly into smaller-bore, less
expensive tubes and burns butane, , propane or natural gas with reduced levels of NOx and CO.
TUBE-O THERM® gas burners ensure improved performance for industrial
washers, dip tanks, water-bath heaters, and solution tanks.
Printable Literature
Product Overview
Specifications/Installation
VALUPAK®
Natural Gas Low Temp Burners
The MAXON VALUPAK® gas burner provides a convenient, packaged solution
for direct fired heating applications in ovens and dryers. The burner fires
cleanly into applications with balanced pressure where high turndown of over
40:1 is required for precise temperature control. Durable steel construction
provides years of reliable service. VALUPAK® is available in wide variety
of packaged forms to suit your application for a bolt-on solution.
Printable Literature
Product Overview
Specifications/Installation
XPO™ Indirect Burner
Low NOx Burners
• Low temperature burner for use with clean
fuel gases
• Single digit NOx emissions at 30% excess
air
• High efficiency with low excess air
requirements
• Capacities up to 3 MBtu/h with 4:1
turndown ratio
• For use in indirect fired solution backed
heaters
Printable Literature
Product Overview
Specifications/Installation
8000 Series Gas Valves
Gas Shut Off Valves Hazardous Area
MAXON Series 8000 Air Actuated Shut Off Valves combine a unique space-saving design with a
maintenance-free bonnet seal and a replaceable actuator for easy installation and smooth,
trouble-free operation. This gas valve's quick exhaust and powerful closing spring provide
valve closure in less than one second and reliable, long-life operation. Valve seats are
micro-lapped metals. MAXON gas valves ensure positive sealing with our trademark durability.
Insist on MAXON shut off valves for your safety-critical combustion systems.
Unlike other pneumatic valves, MAXON valves require no maintenance. More importantly,
MAXON seats require no regular tightening of valve packings like ball valve designs The Series
8000 Valve has been FM, CSA and CE rated for hazardous locations.
Printable Literature
Product Overview
Specifications/Installation
Valve Maintenance
Leak Testing
Valve Sizing Charts
