Helping utilities and consumers make the most of finite water and energy resources takes more than just innovative technology and know-how. Sensus delivers reliable, flexible, and proven products and solutions that provide advanced measurement, data collection, analysis and control capabilities that help our customers improve operational efficiency while reducing their environmental impact.
Service Regulators
Domestic 61R2
Sensus Model 61R2 domestic service regulators can be used on both residential and small
commercial and industrial applications. With a variety of body sizes, loading springs, and
orifice sizes, these regulators can provide the outlet pressure ranges and capacities to
fit most applications for a 6" service diaphragm regulator. An internal relief valve (IRV)
is a standard feature for the 61R2.
The Sensus Model 61R2 was previously manufactured as the Sensus Model 143-B.
Printable Literature
Data Sheets
Model 61R2 Technical Data (TD-1308)
Installation Recommendations
General Safety Instruction for Gas Regulators (RM-1399)
Model 496 & 61R2 Installation and Maintenance (RM-1307)
Service Regulators
Domestic 143-80
Sensus Model 143-80 domestic service regulators can be used on both residential and small
commercial and industrial applications. With a variety of body sizes, loading springs, and
orifice sizes, these regulators can provide the outlet pressure ranges and capacities to fit
most applications for a 6" service diaphragm regulator. The model 143-80 design provides the
popular union nut connection, not requiring bolts or screws to connect the body to the
diaphragm assembly. It is available with an internal relief valve (IRV), and with a low pressure
cutoff (LPCO). Simple, rugged, precise and outstanding performance.
Printable Literature
Data Sheets
Model 143-80 Technical Data (TD-1301)
Model 143-80-6 LPCO Data Sheet (TD-1301-L)
Technical Papers
Model 143-80 Orifice Change Procedure
Installation Recommendations
143-80 Installation & Maintenance (RM-1301)
General Safety Instruction for Gas Regulators (RM-1399)
Service Regulators
Commercial 243
The Model 243 service regulator is a large capacity industrial service regulator designed for commercial, industrial, and gas distribution
use. As a result of the union connection between the fully interchangeable bodies and the diaphragm case, they have remarkable field versatility.
They are easy to install, adjust, inspect, and service in all piping arrangements. The model 243 can be used in a variety of applications such
as: factories, foundries, district regulator stations, commercial laundries, and all types of gas fueled equipment including boilers, burners,
furnaces, ovens, heaters, kilns, and engines.
Printable Literature
Data Sheets
Model 243 Regulator Bulletin (R-1306)
Model 243-DOT Regulator Bulletin (RDS-1306-2)
Technical Papers
243 Orifice Change Procedure
Model 243 Low Pressure Cutoff (RDS-1306-1)
Monitor Regulator Installation (RDS-1500)
Installation Recommendations
General Safety Instruction for Gas Regulators (RM-1399)
Model 243 Installation & Maintenance (RM-1306-1)
Combustion Boiler Regulators
Sensus industrial combustion regulators combine new technology with modern design to provide
greater capacity, higher inlet pressure, more accurate performance, and faster speed of response.
In most cases, this will allow the use of a smaller regulator. Both the Model 121 and Model 122
regulators have high strength, corrosion resistant, die-cast diaphragm cases and cast iron bodies,
assuring a highly functional regulator at a better price. Both models incorporate soft seat valve
material plus a precision machined "knife edge" orifice to provide a positive, tight shutoff.
Sensus Metering Systems' industrial combustion regulators can be used in a variety of commercial
and industrial applications including: burners, boilers, furnaces, air heaters, kilns, or gas
engines where fast response will improve performance.
Printable Literature
Data Sheets
Model 121 Regulator Bulletin (R-1328)
Model 122 Regulator Bulletin (R-1329)
Technical Papers
Model 121 Pilot Operated - Pressure Loaded and V-Port Valve (RDS-1328)
Installation Recommendations
General Safety Instruction for Gas Regulators (RM-1399)
Model 121 Installation & Maintenance (RM-1328)
Model 122 Installation & Maintenance (RM-1329)
Service Regulators
High Pressure 046
Sensus field and high pressure service regulators combine simplicity of design with rugged
construction, exceptional performance, and operational safety to provide dependable, flexible,
and economical answers for pounds-to-pounds pressure regulation applications.
The Model 046 family of high pressure regulators is easy to install, adjust, inspect, and service
in all piping arrangements. Typical applications include farm taps, field regulator applications,
and high pressure industrial air or gases.
The 2" Model 141-A regulator is designed for high pressure applications such as intermediate and
small volume loads on gas transmission lines. It is excellent for single and double stage reduction
ahead of the service regulator. The 141-A can be used on pipeline taps serving remote farm, domestic,
commercial, and industrial customers. It can also be used on other kinds of high pressure loads including
producer field work, high pressure burners and compressed air systems.
Printable Literature
Data Sheets
Model 046 Field Regulator Bulletin (R-1312)
Model 141-A Field Regulator Bulletin (R-1311)
Technical Papers
046 Orifice Change Procedure
Installation Recommendations
General Safety Instruction for Gas Regulators (RM-1399)
Model 046 Installation & Maintenance (RM-1312)
Model 141-A Installation & Maintenance (RM-1311)
Self Operated Regulators
Lower Pressure
The Model 461-S and Model 441-S family of regulators are balanced valve, spring type regulators
designed for distribution and industrial applications. They are extremely dependable with simple
design, sturdy construction, and fast response. Service and adjustment are easy and overall
operation is stable and sensitive.
The 461-S, 461-8S, and 461-12S models are ideal for distribution and industrial applications
where a single seat regulator is too small and the usual 2" balanced valve regulators are too
large. Their large exit areas give them a broad capacity, making them applicable to a wide
variety of load handling requirements.
But, when large loads are the requirement, the model 441-S regulators have the larger bodies
and valves to deliver the gas. Large, flexible diaphragms combined with accurately calibrated
springs enable these large capacity regulators to produce precise pressure control while
maintaining a high level of sensitivity and stability. The combination of their fast response,
dependability, and accuracy make the 441-S models ideal for monitoring, as well as other
applications where speed and accuracy are significant.
Printable Literature
Data Sheets
Model 441-S Regulator (R-1350)
Model 461-S, -8S, -12S Regulators (R-1330)
Parts List
Model 441-S Parts List (RP-1350)
Installation Recommendations
General Safety Instruction for Gas Regulators (RM-1399)
Model 441-S Installation & Maintenance (RM-1350)
Model 461-S, -8S, -12S Installation & Maintenance (RM-1330)
Self Operated Regulators
Medium Pressure
The Model 461-57S and Model 441-57S are spring-operated regulators that incorporate a
"roll-out" diaphragm which approximates the performance of a pilot-operated regulator. The
roll-out diaphragm makes this exceptional performance possible because its action reduces
"droop" to a minimum. By offering near pilot-operated performance without a pilot, the 57S
regulators offer the advantages of simplicity, dependability, freedom from freeze-up, and
exceptionally fast response.
Both models are perfect for most intermediate and large capacity applications including gas
distribution systems, district regulator sets, city gate stations, town border stations,
monitoring, and a wide variety of industrial applications. These workhorses of the industry
have provided dependable service for over 60 years.
Printable Literature
Data Sheets
Model 441-57S Regulator Bulletin (R-1360)
Model 461-57S Regulator Bulletin (R-1331)
Parts List
Model 441-57S Parts List (RP-1360)
Installation Recommendations
General Safety Instruction for Gas Regulators (RM-1399)
Model 441-57S Installation & Maintenance (RM-1360)
Model 461-57S Installation & Maintenance (RM-1331)
Self Operated Regulators
High Pressure
The Model 461-X57 and Model 441-X57 are unique high pressure, large capacity spring operated
regulators that incorporate the same "roll-out" diaphragm principal that achieved such success
in the widely used 461-57S and 441-57S regulators. Both regulators offer pilot type performance
with spring-operated regulator simplicity. The roll-out diaphragm makes this exceptional
performance possible because its action reduces "droop" to a minimum. Offering fast response
and ease of installation, adjustment, and servicing, the 461-X57 and 441-X57 models are perfect
for most high pressure, large capacity applications including high pressure regulator sets, gas
distribution systems, town border stations, transmission systems, monitoring, and most high
pressure large capacity industrial applications.
Printable Literature
Data Sheets
Model 441-X57 Regulator Bulletin (R-1361)
Model 461-X57 Regulator Bulletin (R-1332)
Parts List
Model 461-X57 Parts List (RP-1332)
Installation Recommendation
General Safety Instruction for Gas Regulators (RM-1399)
Model 441-X57 Installation & Maintenance (RM-1361)
Model 461-X57 Installation & Maintenance (RM-1332)
Pilot Operated Regulators
Service 243 RPC
Sensus Model 243-RPC regulators are rugged, reliable pilot-operated regulators that incorporate
the same relay operation principle as the well-known 441-VPC. They offer exceptionally precise
regulation and are accurate to within ± 0.5% (absolute outlet pressure) from minimum to wide-open
flow. The 243-RPC pilot-operated regulator is designed for fixed factoring, pressure factor
measurement, pressure compensated metering, and other applications requiring exceptionally
precise pressure control.
Printable Literature
Data Sheets
Model 243 RPC Regulators (R-1343)
Installation Recommendations
General Safety Instruction for Gas Regulators (RM-1399)
Model 243 RPC Installation & Maintenance (RM-1343)
Orifice Change Procedure
Pilot Operated Regulators
Intermediate Capacity
Sensus Model 1100 and 1200 pilot operated regulators are designed to fit your specialized
intermediate capacity regulator needs. These regulators provide sensitivity and a high degree
of accuracy for fixed factor billing on modulating loads. Note, solenoid load applications are
not recommended. Load limiting regulators on the inlet supply to the pilot will improve the
accuracy of these products.
Printable Literature
Model 1100 Bulletin (R-1341)
Model 1200 Bulletin (R-1342)
Parts List
Model 1100 Parts List (RP-1341)
Model 1200 Parts List (RP-1342)
Installation Recommendations
General Safety Instruction for Gas Regulators (RM-1399)
Pilot Operated Regulators
High Capacity 441 VPC
Sensus Model 441-VPC pilot operated regulators are designed to fit your specialized large
capacity regulator needs. These regulators provide sensitivity, high capacity, and a high degree
of accuracy for fixed factor billing on modulating loads. The 441-VPC incorporates Sensus
Metering Systems' extremely successful 441 series regulators with a pilot for sensing regulated
pressure, and for controlling overall operation. Use of a 441-VPC is especially recommended
where extremely close control is required. These regulators can be remotely controlled by using
air loading in the pilot upper case. Because of the exceptionally close control offered by the
441-VPC family, they are ideal for applications such as district and station regulator sets,
distribution systems, transmission systems, compressor stations, and large capacity industrial
combustion systems where a high degree of accuracy is required. Note, solenoid load applications
are not recommended. Load limiting regulators on the inlet supply to the pilot will improve the
accuracy of these products.
Printable Literature
Data Sheets
Model 441-VPC Regulator (R-1370)
Parts List
Type 511 Pilot Parts List (RP-1370-1)
Type 521 & 53 Pilot Parts List (RP-1370-2)
Installation Recommendations
General Safety Instruction for Gas Regulators (RM-1399)
Model 441-VPC Installation & Maintenance (RM-1370)
Sonix Ultrasonic Meters
Industrial / Commercial Meters
Using digital ultrasonic technology, Sonix industrial and commercial meters feature no moving
parts, virtually eliminating repair costs. Sonix meters retain their calibration and notify the
user if they are tampered with or if they malfunction. Sonix's attractive and compact design
afford flexible installation options. The electronic platform allows the user to include automatic
meter reading more cost effectively and upgrade the meter with the latest options while it is
still in service
Printable Literature
Data Sheets
Sonix 12 / 16 / 25
Sonix 2000 (M-1040E -R5)
Sonix 600 (M-1033E)
Sonix 880 (M-1034E)
Sonix Remote Communications (M-1030G)
Specification Selection Sheets
Sonix 2000
Sonix 420 (12), 600 (16), and 880 (25)
Technical Papers
Features & Benefits for Utilities (M-1031C)
Proving the Sonix Meter (M-1030K)
Sonix FAQ (M-1030C)
Sonix Operating Principles (M-1031B)
Additional Product Information
Sonix Capacity Chart
Sonix vs. Rotary Meters
Sonix2000 Proving Instructions
SonixCom Manual - Sonix 2000 Supplement
SonixCom Operating Manual
SonixPalm Users Guide
Diaphragm Meters
Cubix and accuWAVE
Sensus domestic/residential meters incorporate the latest design concepts with modern materials
for lighter weight, more durable meters with greater life expectancy.
The Cubix250 is based on a Sensus international gas meter design that boasts more than 10 million
units in service throughout the Europe and Asia. The North American version meets utility
standards and offers the same connection and index options as our larger residential-class
meters - at a smaller size and cost.
The revolutionary accuWAVE diaphragm is reestablishing Sensus as the leader in residential-class
meter accuracy and long-term performance. The patented accuWAVE diaphragm, now standard on Sensus
R-275, 315 and 415 series domestic meters, registers consumption with smooth precision while
incorporating advanced materials that ensure proof stability over time.
Printable Literature
Data Sheets
Cubix250/MR-7 Data Sheet (M-1005 R3)
Models R-275, 315 and 415 (M-1002)
Replacement Modules (M-1015)
Information Sheets
Cubix250/MR-7 Frequently Asked Questions (M-1005 FAQ)
Technical Papers
Measurement for Propane (LPG-1000)
Brochures
accuWAVE R-275/315/415 (M-1002AW)
Parts Lists
Model 415 and MR-12 Parts List (MP-1001F)
Models MR-8, R-275 and 315 Parts (MP-1002A)
Models RC-230, and RCM-230 Parts (MP-1002C)
Turbine Meters
Auto Adjust Meters
Sensus Auto-Adjust II Turbo-Meters provide highly accurate large volume
measurement using patented dual rotor technology that self-checks and automatically
adjusts meter performance. The AAT is virtually insensitive to deviations in upstream
flow conditions. Used with Auto-Adjust electronics, AAT technology provides advanced
warning of a deteriorating condition well before meter failure occurs.
Printable Literature
Data Sheets
(M-1073) T-18/27, T-35/57, T-60/90, T-140/230 (M-1073)
(M-1073-3PD) T-18/27, T-35/57, T-60/90, T-140/230 (M-1073-3PD)
30 Degree Blade Tip Rotors (MDS-1073-30D)
Turbo Corrector (MI-310)
Turbo Monitor (MI-300)
Turbo Prover (MI-320)
Articles
Southeast Alabama Gas District (Pipeline & Gas Technology)
Parts List
200mm, A200U30 & A200U45 (MP-1073CM)
Model AAT-18/27 (MP-1073E)
Model AAT-60/90 Blade Tip Sensors (MP-1073CS)
Model AAT-140/230 (MP-1073D)
Model AAT-35/57 (MP-1073B)
Model AAT-60/90 (MP-1073C)
Installation Recommendations
Mercury Instruments Mini-AT
Mercury Instruments Turbo Corrector
Mercury Instruments Turbo Monitor/Prover
Turbo Installation & Maintenance (International)
Turbo Installation & Maintenance (MM-1070)
Additional Product Information
AAT Advantages (MDS-1073)
AAT Construction & Design Features (MIM-1073)
Turbo Refurbishment Program
Turbine Meters
Mark II Meters
The Mark II Turbo-Meter established Sensus Metering Systems as the leader in turbine meter gas
measurement. The 4 - 12" Turbos feature a top entry design that allows an interchangeable
measurement module to be removed from the meter body while the body remains in-line. All moving
parts are housed in a sealed chamber protected from line contaminants. The unique design of
the 45° or 30° blade angle rotor allows the meter to extract the maximum amount of kinetic
energy from flowing gas. Mark II Turbo-Meters accept a multitude of meter-mounted readout
devices and provide calibrated pulse outputs for electronic measurement.
Printable Literature
Data Sheets
Slot Sensor Pulser (M-1070-10)
T-18/27, T-35/57, T-60/90, T-140/230 (M-1070)
T-18/27, T-35/57, T-60/90, T-140/230 (M-1070-3PD)
Installation Recommendations
Turbo Installation & Maintenance (International)
Turbo Installation & Maintenance (MM-1070)
Meter Specifications
Mark II & Mark IIE OIML (OIML-1070-METRIC)
Parts List
100mm T100U45/30 MK II (MP-1070AM)
150mm T150U45/30 MK II (MP-1070BM)
Model T-18/27 (MP-1070A)
T-140/230 (MP-1070D)
T-140/230 Blade Tip (MP-1070DS)
T-18/27 Blade Tip (MP-1070AS)
T-35/57 (MP-1070B)
T-35/57 Blade Tip (MP-1070BS)
T-60/90 (MP-1070C)
T-60/90 Blade Tip (MP-1070CS)
Turbine Meters
TPL 9 and T 10
The Sensus TPL-9 Turbo-Meter is a 90° angled body meter that permits compact installations
with the meter inlet in either a horizontal or vertical plane. The Sensus T-10 Turbo-Meter is
a straight-through (wafer-style) meter designed for high pressure applications. Both 2" and 3"
meters come with cast steel bodies and interchangeable modules.
Printable Literature
Data Sheets
Model T-10 - 2" and 3" (M-1083)
TPL-9 - 2" and 3" (M-1080)
Parts Lists
Model T-10 Parts List (MP-1083)
Model TPL-9 Parts List (MP-1080B)
TPL-9 Safety Interlock Parts List (MP-1081)
Installation Recommendations
T-10 Slot Sensor On Follower Magnet Assembly (M-1083-10)
TPL-9 - 2" and 3" Safety Interlock Device (MM-1081)
TPL-9 Installation & Maintenance (MM-1080)
Turbo Installation & Maintenance (MM-1070)
Service Regulators
Domestic 496
Sensus Model 496 domestic service regulators can be used on both residential and small
commercial and industrial applications. The regulator is available with a variety of body
sizes, loading springs, and orifice sizes. The 4" roll-out diaphragm provides exceptional
performance, and provides capacities that normally require 6" diaphragm regulators. An
internal relief valve is a standard feature in the model 496.
The Sensus Model 496 was previously manufactured as the Sensus Model 043-B.
Printable Literature
Data Sheets
Model 496 Technical Data (TD-1307)
Installation Recommendations
General Safety Instruction for Gas Regulators (RM-1399)
Model 496 & 61R2 Installation and Maintenance (RM-1307)
