Features:
• Direct-read 8-digit LCD display of
cumulative kWh.
• E-Mon Energy software supports load
profiling (5 or 15 minute) of kWh & kVARh
• E-Mon Energy software supports real-time
reading of:
– Amps per Phase
– Volts per Phase-to-Neutral
– Volts per Phase-to-Phase
– kW, kVA and kVAR per Phase
– Total kW, kVA and kVAR
– Frequency
– Power Factor Percent & Angle per Phase
• Open protocol for easy integration to
various building automation and energy
management systems, including optional
Modbus RTU & TCP/IP, BACnet IP & MS/TP
and LonWorks Twisted Pair.
• Patented 0-2 volt output split-core current
sensors promote enhanced safety and
accurate remote mounting of current
sensors up to 500 feet from the meter
without power interruption. (Optional
solid-core current sensors available in
100 & 200 Amp.)
• Current sensor installation diagnostics
indicator on display.
• Revenue Grade Accuracy.
• RS-485 Communications capability
supports the following connection
configurations (or combinations not
to exceed 52 devices per channel):
– Up to 52 Class 3000 meters and/or
IDR-8 interval data recorders
– Up to 26 IDR-16 interval data recorders
(IDR-16 counts as two devices)
Cabling can be either daisy-chain or star configuration, 4-conductor, 24-26 AWG, up to 4,000 cable feet total per channel.
• Communication Options:
Requires E-Mon Energy software for reading:
– RS-232/RS-485 (Standard)
– Telephone Modem
– Ethernet
Requires third-party EMS/BMS system supplied by others. E-Mon Energy software not used:
– Modbus RTU or TCP/IP
– BACnet IP or MS/TP
– LONworks TP (Twisted Pair)
• Modbus and BACnet options support two
external inputs from gas, water, etc.
meters. (Dry contact, 10 Hz max. input.)
Modbus RTU, BACnet IP & MS/TP available
with RS-485. Modbus TCP/IP or BACnet IP
requires Ethernet. Standard EZ-7 protocol
supports one external input.
• Meter is designed for use on both
3-phase, 3-wire (delta) and 3-phase,
4-wire (wye) circuits. (Specify when
ordering.)
• Available in standard JIC industrial-grade
steel enclosure (gray-standard,
green-optional)
(Dim: 7 1/4″H x 7″W x 3 1/4″D)
or optional NEMA 4X outdoor enclosure
(Dim: 7 1/2″H x 7 1/2″W x 4″D.)
• UL/CUL Listed. CSA Approved.
• Revenue Grade Accuracy. Meter certified
to IEEE/ANSI C12.20 accuracy standard.
Printable Literature
Class 5000 Specification Sheet
Class 5000 Installation Overview